When the transmission or transmission control unit is replaced, the IP characteristic data must be written into the TCM. This process is called TCM configuration. If the data is not written into the replacement TCM, the transmission will not operate correctly. When the transmission is replaced, the characteristic data for the new transmission must be written into the TCM. This application requires the use of the Nissan CONSULT-III plus diagnostic software version 6.12 or above, and GT-R diagnostic software version 14.12 or above, and the GT-R diagnostic security card.
Here I want to share the guide on how install Nissan Consult 3 plus diagnostic software.And here collect some different version installation method.The installation methods of different Consult 3 may be similar,if there here is no version that you have or you have higher version,please try to install it referring to these method by yourself. 2b1af7f3a8